Chlorine Controllers

Chlorine controller monitors and controls free and total chlorine levels within critical process parameters typically measured in parts per million (ppm) due to it's low concentration in water therefore dosage of chlorine is comparatively a fraction of the systems requiring a amperometric sensor to monitor chlorine levels, used in multiple industrial sectors controllers can be configured to regulate levels operating independently with internet access for remote monitoring and management of program settings.

Due to strict regulations including health and safety concerns chlorine dosing systems can be connected to a local webserver network allowing the operator remote access to monitor the system in real-time with full programming authority to amend dosing parameters.

Chlorine Measurement

The measurement chlorine in a solution is determined using highly sensitive amperometric chlorine sensors consisting of two electrodes (anode and cathode) measuring a change in current between the electrodes where a voltage applied to the cathode reduces the chlorine to chloride, the process consumes electrons generated by the second electrode (the anode) inside the sensor the number of electrons consumed at the cathode is directly proportional to the rate at which analyte diffuses to the electrode surface. The current signal generated by the electrodes is converted by the sensor into a voltage signal producing exceptional measurement accuracy in terms of free and total chlorine in parts per million (ppm) measurement.

These types of chlorine sensors are fairly low maintenance although they do require periodic cleaning to wash away solids that slowly accumulate on the membrane they provide an effective and reliable source of continuous stable measurement with low maintenance and low running costs over many years.

Chlorine Instruments

A chlorine instrument analyses free and total chlorine in parts per million (ppm)measured by a amperometric sensor in an aqueous solution ensuring levels remain within critical process parameters and regulating the amount of chlorine dosed into the system, the instruments functionality can be configured for specific operational demands often required in commercial and industrial applications with internet network access for remote real-time monitoring and management of program settings.

Due to strict regulations including health and safety concerns chlorine dosing systems can be connected to a local webserver network allowing the operator remote access to monitor the system in real-time with full programming authority to amend dosing parameters.

Chlorine Controllers

High precision chlorine controllers in surface mounting housing operating as a stand alone system or can be easily integrated with other process equipment required for more complex control systems applications such as wastewater, water treatment and effluent treatment applications, equipped with large self explanatory graphic display for real-time measurement including messages associated with temperature, alarms for flow and electrode error including output relays for chemical dosing pumps.

MT200-CL Controller

Chlorine controller for high precision process applications characterised by large measurement graphic display non-intrusive programming software system and real-time measurement for reliable process control, visual inspection of the display provides additional information for temperature, flow, active outputs and alarm status with parameters configured for process-specific tasks.

Technical Details

» Configurable Relay Outputs :- On/Off Mode - PWM Mode - Timed Activation

» Alarm Messages :- Probe Failure - Temperature - Flow - Set-Point Time-Out

»  Chlorine sensor working efficiency address utilising the washing cycle function

» Inputs/Outpus :- Flow - Temp Sensor - 1 x 4÷20mA Output - Alarms

» Temperature Measurement :- PT100 Sensor - PT1000 Sensor

»  Stabilised Universal 100÷240v Power Supply

» Dimensions :- 144 x 144 x 122mm

Applications

| Water Treatment | Wastewater | Drinking Water | Swimming Pools | PotableWastewater | Food & Beverage | Agricultural Systems  |

QR Codes
Controller Configurations
Advanced Settings

Chlorine Controllers

( PID Software )

Sophisticated professional high-precision chlorine instrument with PID software technology continuously adapts live readings against the desired set-point parameters to a algorithm program minimising any chemical overshoot and increasing the process efficiency, the chlorine sensor is protected against electrical interference by reinforced galvanic isolation eliminating measurement variations critical for many high precision water treatment processes in the commercial and industrial sectors.

N.B. Controller displays chlorine measurements in PPM

MT400-CL PID Controller

Sophisticated chlorine controller for high precision control processes with PID algorithm software technology and reinforced galvanic isolation that shields the chlorine sensor against any electrical interference, smart graphic display changes colour to indicate live working conditions with non-intrusive programming PID algorithm software for increased measurement precision.

Technical Details

» Configurable Relay Outputs :- PID algorithm according to detected parameters

» Smart Graphic Display :- Changes colour to working status including alarms

»  Chlorine sensor working efficiency address utilising the washing cycle function

» Inputs/Outpus :- Flow - Temp Sensor - 1 x 4÷20mA Output - Alarms

» Temperature Measurement :- PT100 Sensor - PT1000 Sensor

» Remote monitoring access with full programming authority.

»  Stabilised Universal 100÷240v Power Supply

» Dimensions :- 144 x 144 x 122mm

Applications

| Water Treatment | Wastewater | Drinking Water | Swimming Pools | Potable Wastewater | Food & Beverage | Agricultural Systems  |

N.B. Controller displays chlorine measurements in PPM

Panel Mounted Chlorine Instruments

State Of The Art PID Algorithm Software Technology

Chlorine Instruments

High precision chlorine instrument equipped with innovative graphic display simultaneous real-time chlorine and temperature measurements benefiting from standard and advanced menu's allowing the user to determine critical process-specific parameters optimising management of the system, display provides additional information for active outputs, sensor non-functioning, insufficient flow conditions with additional outputs available for pairing with other equipment and remote devices.

MT200-CL Panel Instrument

Chlorine Instrument for high precision processes characterised by large graphic display with non-intrusive programming software and real-time measurement for reliable process control, visual inspection of the display provides additional information for temperature, flow, active outputs and alarm status with pparameters configured for process-specific tasks.

Technical Details

» Configurable Relay Outputs :- On/Off Mode - PWM Mode - Timed Activation

» Alarm Messages :- Probe Failure - Temperature - Flow - Set-Point Time-Out

»  Chlorine sensor working efficiency address utilising the washing cycle function

» Inputs/Outpus :- Flow - Temp Sensor - 1 x 4÷20mA Output - Alarms

» Temperature Measurement :- PT100 Sensor - PT1000 Sensor

»  Stabilised Universal 100÷240v Power Supply

» Dimensions :- 96 x 96 mm

Applications

| Water Treatment | Wastewater | Drinking Water | Swimming Pools | Potable Wastewater | Food & Beverage | Agricultural Systems  |

N.B. Instrument displays chlorine measurements in PPM

Chlorine Instruments

( PID Software )

Sophisticated professional chlorine instrument with PID software technology adapts to live working chlorine readings against the desired set-point parameters to a programmed algorithm eliminating chemical overshoot providing increased precision and process efficiency, the reinforced galvanic isolation shields the sensor against electrical interference eliminating measurement variations that could effect the chemical balance in the system with internet access for remote management of program settings.