Offline Probe Holders
Applications
- Water Treatment
- Cooling Systems
- Water Treatment
- Swimming Pools
- Drinking Water
- Irrigation
Sample Line Probe Holders
We offer a range of pH-redox-chlorine & bromine electrode sample line, bypass and off-line probe holders
specifically designed for integration into water treatment processes the built-in flow switch to signal the control
system to suspend dosing thus protecting against over chemical concentration and ensuring measurements
stay within the desired parameters, once installed the water will always be in contact with the measurement electrode
to ensure optimum measuring conditions and chemical dosing efficiency.
Inline Probe Holders
We offer a range of pH-redox and conductivity inline probe holders specifically designed
for integration into the existing pipework as a simple solution for the precision measurement of the chemical treatment process,
we recommend a bypass sample line with isolation valves before and after the probe holder system providing a practical solution
for calibration and maintenance of the electrodes to ensure optimum measuring conditions and water treatment efficiency.
Electrode Holder
Type PSS-1
Flow-Through Probe Holder
The probe holder for single electrode can be used by passing water from a pressure pipeline through
it, at up to 6 bar. The material of the probe holder is characterised by good transparency and excellent resistance to chemical agents.
Measurement in
either a by-pass sample line or directly the main flow line suitable for all industrial processes
Technical Features
» Material : - (Body) SAN (Styrene Acrylonitrile) |
» Material :- (Head)
polypropylene |
» Probe holder housing thread : - Female ¾" BSP |
» Hydraulic Connection:- 4÷6 -
8÷12 mm hose |
» Wall mounting with integrated bracket |
» Campatibility with 2.7÷12 pH range |
» Probe Size : - Electrodes Ø 12mm |
» Pressure Rating :- 0-6 Bar (84 psi) |
» Temperature Rating 0....40°C |
Electrode Holder
Type PSS-8A
Low Pressure Holder
The probe holder for three electrodes can be used by passing water from a pressure pipeline through up
to 2 bar, the material of the probe holder is characterised by good transparency and excellent resistance to chemical agents.
Measurement in
either a by-pass sample line or directly the main flow line suitable for all industrial processes
Integrated flow sensor
active at 0.5 bar
Accommodates three probes
Technical Features
» Material : - (Body) Transparent PMMA |
» Material :- (Head) Black polypropylene |
» Flow (reed) sensor :- Integrated into head |
» Hydraulic connection 4÷6 - 8÷12mm hose |
» Wall mounting with integrated bracket |
» Campatibility with 2.7÷12 pH range |
» Probe Dia : - Ø 12
- 24 - 36 - 42mm |
» Pressure Rating :- 0-2 Bar (28 psi) |
» Temperature Rating 0....40°C |
Electrode Holder
Type PSS-8A-HP
Technical Features
» Material : - (Body) Transparent PMMA |
» Material :- (Head) Black polypropylene |
» Flow (reed) sensor :- Integrated into head |
» Hydraulic connection 4÷6 - 8÷12mm hose |
» Wall mounting with integrated bracket |
» Campatibility with 2.7÷12 pH range |
» Probe Dia : - Ø 12
- 24 - 36 - 42mm |
» Pressure Rating :- 0-5 Bar (70 psi) |
» Temperature Rating 0....20°C |
High Pressure Holder
The probe holder for three electrodes can be used by passing water from a pressure pipeline through
up to 5 bar, the material of the probe holder is characterised by good transparency and excellent resistance to chemical agents.
Measurement in
either a by-pass sample line or directly the main flow line suitable for all industrial processes
Integrated flow sensor
active at 0.5 bar
Accommodates three probes
Electrode Holder
Type PSS-8A1
Low Pressure Holder
The probe holder for three electrodes can be used by passing water from a pressure pipeline through up
to 2 bar, the material of the probe holder is characterised by good transparency and excellent resistance to chemical agents.
Measurement in
either a by-pass sample line or directly the main flow line suitable for all industrial processes
Integrated flow sensor
active at 0.5 bar
Accommodates three probes
Technical Features
» Material : - (Body) Black polypropylene |
» Material :- (Head)
Black polypropylene |
» Flow (reed) sensor :- Integrated into head |
» Hydraulic connection
4÷6 - 8÷12mm hose |
» Wall mounting with integrated bracket |
» Campatibility with 2.7÷12 pH range |
» Probe Dia : - Ø 12 - 24 - 36 - 42mm |
» Pressure Rating :- 0-2 Bar (28 psi) |
» Temperature Rating 0....40°C |
Electrode Holder
Type PSS-8A1HP
High Pressure Holder
The probe holder for three electrodes can be used by passing water from a pressure pipeline through
up to 5 bar, the material of the probe holder is characterised by good transparency and excellent resistance to chemical agents.
Measurement in
either a by-pass sample line or directly the main flow line suitable for all industrial processes
Integrated flow sensor
active at 0.5 bar
Accommodates three probes
Technical Features
» Material : - (Body) Black polypropylene |
» Material :- (Head)
Black polypropylene |
» Flow (reed) sensor :- Integrated into head |
» Hydraulic connection
4÷6 - 8÷12mm hose |
» Wall mounting with integrated bracket |
» Campatibility with 2.7÷12 pH range |
» Probe Dia : - Ø 12 - 24 - 36 - 42mm |
» Pressure Rating :- 0-5 Bar (70 psi) |
» Temperature Rating 0....20°C |
Submersible Probe Holders
Robust pvc probe holders specifically designed for immersion into tanks, open vessels with excellent
impermeability protection against water and liquids that could compromise pH-redox and conductivity sensors readings
and maintaining optimum measurement control in water treatment applications.
Copyright: - Electronic Dosing Systems 2024
| Water Treatment | Electroplating | Cooling Towers | Industrial Boilers | Beverage & Breweries | Vehicle
Washing | Waste Water Treatment | Swimming Pools & Spas |
| Paper Industry | Petroleum | Bottle Washing |
Hygiene & Cleaning | Biotechnology | Food Industry | Pharmaceutical Industry |
| Controllers | Electrodes | Sensors |
Electronic Dosing Systems
Tel 01299 825 656 Email info@electronicdosingsystems.co.uk