Redox Controllers

 

 

 

Applications

• Wastewater Treatment
• Reverse Osmosis
• Cooling Towers
• Drinking Water
•  Irrigation 
•  Boilers
•  Dairy

 

Proportional Redox (ORP) Control

 

Pulse Frequency Modulation 

Relays generates a volt free pulse signal that is connected into a dosing pump adjusting flow output decreasing proportionally until the set-point threshold has been achieved delivering greater precision increased chemical effiency and control, alternatively used as an auxiliary signal to drive remote control equipment or integrated in complex process systems and applications.

 

Pulse Width Modulation 

Set-point relays are activated on a timed cycle proportional to the measured chlorine value in respect to the desired set point threshold decreasing the relay activated time until the desired redox (orp) level is achieved, being a cost efficient solution to proportional control in numerous process applications when operating equipment such as solenoid valves intermittently through a 230v supply.

Redox Controllers

 

Exceptional measurement precision and acuracy with large graphic display intuitive navigation menu and extensive features and functions to maintain redox levels within specific boundaries, controllers can be used either as a stand alone system or integrated into more complex dosing systems where remote visualization and full programming authority can be accessed. 

Redox Controller

 

Instrument characterised by isolated measurement graphic display with active outputs and alarm status icons.

Parameters configured for process-specific tasks with real-time measurement for reliable process control.

 

»  Programmable Set-Points :- On/Off Activation - Timed Activation - Smart Proportional Modulation.

»  Alarm Messages :- Probe Failure - Temperature - Flow - Set-Point Time-Out.

»  Redox probe effiency can be maintained utilising the washing cycle function.

 

»  Stabilised 100÷240v power supply delivers reduced energy consumption.

»  Remote communication websever hub with full programming authority

 

Technical Features

| 2 x Set-Points | 1 x 4÷20 mA Output | 1 x Flow Input | 2 x Temp Sensor |1 x Alarm Output 230v |

| Dimensions :- » Wall Mounting (144 x 144 x 122) »  Panel Mount Version (96 x 96 x 42)

 

Measurement Options;

| pH| Chlorine | Redox | Conductivity | Bromine | Peracetic Acid |

| Hydrogen Peroxide | Dissolved Oxygen | Ozone | Temperatue|

 

MT200-RX Redox

(ORP) Controllers

Redox PID Controller

 

Instrument characterised by isolated measurement graphic display with active outputs and alarm status icons.

Parameters configured for process-specific tasks with real-time measurement for reliable process control.

 

»  Simualtaneous smart intelligent display changes colour according to current working conditions

»  Programmable PID Outputs :- Programme set-point parameters according to a PID algorithm

»  Alarm Messages :- Probe Failure - Temperature - Flow - Set-Point Time-Out .

»  Redox probe effiency can be maintained utilising the washing cycle function .

 

»  Remote communication websever hub with full programming authority

 

Technical Features

| 2 x Set-Points | 1 x 4÷20 mA Output | 1 x Flow Input | 2 x Temp Sensor | 1 x Alarm Output 230v |

| Dimensions :- » Wall Mounting (144 x 144 x 122) »  Panel Mount Version (96 x 96 x 42)

»  Stabilised 100÷240v power supply delivers reduced energy consumption.

 

Measurement Options;

| pH | Chlorine | Redox | Conductivity | Bromine | Peracetic Acid |

| Hydrogen Peroxide | Dissolved Oxygen | Ozone | Temperatue |

 

MT400-RX Redox

(ORP) Controllers

Redox Controllers

 

Instrument with isolated measurement and graphic display suitable for complex water-treatment applications.

Parameters configured for process-specific measurement tasks from basic to advanced program schedules.

 

»  Self-explanatory intuitive navigation menu programming according to complexity of working parameters.

»  Simpified and professional program level menu's to adapt parameters to application specific control.

 

»  Programmable Set-Points Modes :- On/Off activation - Proportional width modulation (pwm) activation.

»  Set-Points Parameters :- Hysteresis - Delay Start - Max Dosage Time - Low-High Phreshold Alarm.

 

»  Remote 485 serial port modbus communication websever hub with full programming authority.

 

Technical Feature

| 2 x Set-Points | 1 x 4÷20 mA Outputs | 1 x 4÷20 mA Chart-Recorder | 1 x Level Input | 

| 1 x Flow Switch Input | 1 x Temperature Sensor (PT100) | 1 x Alarm Output 230v |

»  Dimensions :- 231 x 125 x 90 Enclosure IP66 Protection

 

Measurement Options;

| pH| Chlorine | Redox | Conductivity | Bromine | Peracetic Acid |

| Hydrogen Peroxide | Dissolved Oxygen | Ozone | Temperatue|

DC100-RX Redox

(ORP) Controllers

Electrodes - Probes - Sensors

 

 

| pH | Redox | Conductivity | Chlorine | Bromine | Chlorine Dioxide | Hydrogen Peroxide | Peracetic Acid |

 

| Inline Holders | Submersible Holders | Bypass-Offline Holders |