Conductivity (TDS)
Controllers
 
Applications
 

conductivity controllers for continuous monitoring and accuracy with precision for all types of application's

Proportional Conductivity Control
 
Pulse Frequency Modulation 
Relays generate a volt free pulse signal that is connected into a dosing pump adjusting flow output decreasing proportionally until the set-point threshold has been achieved delivering greater precision increased chemical effiency and control, alternatively the signal can be utilised to control conductivity levels on cooling tower bleed systems or integrated in high-end complex process applications.
 
Pulse Width Modulation 
Set-point relays are activated on a timed cycle proportional to the measured conductivity value in respect to the set point threshold decreasing the relay activated time until the desired conductivity level is achieved, being a cost efficient solution to proportional control in numerous process applications when operating equipment such as solenoid valves intermittently through a 230v supply.

Conductivity Controllers
 
Exceptional measurement precision with large graphic display intuitive navigation menu and extensive features and functions maintain conductivity levels within specific boundaries, controllers can be used either as a stand alone system or integrated into more complex dosing systems where remote visualization and full programming authority can be accessed. 

MT400-CD Conductivity Controllers

Conductivity controllers - conductivity bleed systems on cooling towers precise measurement and continuous control  and reliabil
Product Enquiry
Product Enquiry
Product Enquiry
Conductivity controllers with programmable PID algorithm adapts parameters to optimise process performance Conductivity controllers for monitoring and control of cooling tower bleed systems
pH Electrodes
Redox Electrodes
Conductivity Probes
Conductivity Electrodes
Chlorine- Chlorine Dioxide Sensors
Bromine-Hydrogen Preoxide-Peracetic Acid Sensors
Electrodes-Probes Sensors
Home
Contact us
pH Controllers
Redox Controllers
Chlorine Controllers
Conductivity Controllers
Multifunction Controllers
Digital Instruments
Controllers
Dosing Pumps Constant Operation
Dosing Pumps Digital Microprocessor
Dosing Pump with pH, Redox Controllers
Dosing Pumps ATEX Zone 2
Dosing Pump Accessories
Solenoid Dosing Pumps
Chemical Dosing Tanks
Water Meters
Dosing Tanks
Water Meters
Inline Probe Holders
By-Pass Probe Holders
Submersible Probe Holders
Electrodes-Probes Holders
Electronic Dosing Systems
 
Tel 01299 825 656 Email info@electronicdosingsystems.co.uk
Mechanical Diaphragm Pumps
Motor-Driven Piston Metering Pumps
Motor-Driven Digital Metering Pumps
Metering Pump Accessories
Motor-Driven
 Metering Pumps
Characteristics Common To All Controllers

              Auxiliary outputs for equipment or sensor cleaning                               Programmable maximum dosing time
              Auxilary programming of days and time operations                              Temperature compensate sensor set point

              Timer program to start-up and end unit operations                                 Graphic charts and data logger download
              Real-time configurable timer to drive controller                                    Automatic measured parameter recognition

Conductivity Controller
 
Instrument characterised by isolated measurement graphic display with active outputs and alarm status icons.
Parameters configured for process-specific tasks with real-time measurement for reliable process control.
 
  Programmable Set-Points :- On/Off Activation - Timed Activation - Smart Proportional Modulation.
 Alarm Messages :- Probe Failure - Temperature - Flow - Set-Point Time-Out.
  Conductivity measurement can be visualised in parts per million (ppm) format.
 
  Stabilised 100240v power supply delivers reduced energy consumption.
  Remote communication websever hub with full programming authority
 
Technical Features
| 2 x Set-Points 1 x 420 mA Output 1 x Flow Input 2 x Temp Sensor | 1 x Alarm Output 230v |
| Dimensions :-  Wall Mounting (144 x 144 x 122)   Panel Mount Version (96 x 96 x 42)
 
Measurement Options;
| pH| Chlorine | Redox | Conductivity | Bromine | Peracetic Acid |
| Hydrogen Peroxide | Dissolved Oxygen | Ozone | Temperatue|
 

MT200-CD Conductivity Controllers

Conductivity PID Controller
 
Instrument characterised by isolated measurement graphic display with active outputs and alarm status icons.
Parameters configured for process-specific tasks with real-time measurement for reliable process control.
 
  Simualtaneous smart intelligent display changes colour according to current working conditions.
  Programmable PID Outputs :- Programme set-point parameters according to a PID algorithm.
 Alarm Messages :- Probe Failure - Temperature - Flow - Set-Point Time-Out .
  Conductivity measurement can be visualised in parts per million (ppm) format.
 
  Remote communication websever hub with full programming authority.
 
Technical Features
| 2 x Set-Points 1 x 420 mA Output 1 x Flow Input 2 x Temp Sensor | 1 x Alarm Output 230v |
| Dimensions :-  Wall Mounting (144 x 144 x 122)   Panel Mount Version (96 x 96 x 42)
  Stabilised 100240v power supply delivers reduced energy consumption.
 
Measurement Options;
| pH | Chlorine | Redox | Conductivity | Bromine | Peracetic Acid |
| Hydrogen Peroxide | Dissolved Oxygen | Ozone | Temperatue |
 

QR Codes
Controller Configurations
Advanced Settings

DC100-CD Conductivity Controllers

Conductivity Controllers
 
Instrument with isolated measurement and graphic display suitable for complex water-treatment applications.
Parameters configured for process-specific measurement tasks from basic to advanced program schedules.
 
  Self-explanatory intuitive navigation menu programming according to complexity of working parameters.
  Simpified and professional program level menu's to adapt parameters to application specific control.
 
  Programmable Set-Points Modes :- On/Off activation - Proportional width modulation (pwm) activation
  Set-Points Parameters :- Hysteresis - Delay Start - Max Dosage Time - Low-High Phreshold Alarm  
 
  Remote 485 serial port modbus communication websever hub with full programming authority
 
Technical Feature
| 2 x Set-Points 1 x 420 mA Outputs 1 x 420 mA Chart-Recorder 1 x Level Input | 
| 1 x Flow Switch Input | 1 x Temperature Sensor (PT100) | 1 x Alarm Output 230v |
  Dimensions :- 231 x 125 x 90 Enclosure IP66 Protection
 
Measurement Options;
| pH | Chlorine | Redox | Conductivity | Bromine | Peracetic Acid |
| Hydrogen Peroxide | Dissolved Oxygen | Ozone | Temperatue |

Universal 100240v
Power Supply
Electrodes - Probes - Sensors
 
 
 
   Copyright: - Electronic Dosing Systems 2024
| Water Treatment | Electroplating | Cooling Towers | Industrial Boilers | Beverage & Breweries | Vehicle Washing | Waste Water Treatment | Swimming Pools & Spas |  
| Paper Industry | Petroleum | Bottle Washing | Hygiene & Cleaning | Biotechnology | Food Industry | Pharmaceutical Industry |