Water meters designed to be permanently installed into pipework with pulse output to accurately measure the water flow, we offer two types of meters designed for either hot water and cold water installations.
Meters are supplied with a set of BSP union couplings and seals for installation into the pipework, available in sizes ½" to 2" we recommend isolation valves are installed for maintenance and servicing requirements.

Flange meters designed for larger diameter pipework with PN16 gaskets and pulse signal to accurately measure the water flow, manufactured in a coated cast iron body housing with a highly sensitive turbine and impulse mechanism that drives the mechanical gearing.
Two types of meters available designed for 90° hot water & 30° cold water in 2" to 8" sizes, it is recommended isolation valves are installed for maintenance & servicing purposes.

Impulse Water Meters

Coupling Type

 

 

 

Flanged Impulse

Water Meters

 

 

 

Totalisation Counter

 

Provides an accurate way of measuring the total amount of water that has passed through the water meter, the mechanical counter displays directly on the front face of the water meter and is non-resettable.

 

Pulsed Output Signal

 

Volt free pulse signal proportional to the flow can be used in BMS, PLC's or directly to dosing pumps in water treatment applications, as the flow increases the frequency of pulses increases proportionally from the water meter.

 

Water Meter K Factor

 

Defines the number of impulses per litre that passes the water meter, normally 2"- 5" meters are set to 1 pulse per 100 litres (K100) and 5"- 8" meters 1 pulse per 1000 litres (K1000) however meters can be set to different k factors.